CopperTake

CopperTake Support

CopperTake records 24-bit mono WAV takes on iPhone, iPad, and Mac. For help or feedback, email seltzer.wisdom7h@icloud.com.

Include your CopperTake version, device model, operating-system version, microphone or interface model, and the steps that led to the issue. You do not need to include a recording or script unless you choose to share it.

Trial, Studio, and companion devices

The app is free to download and to use as a companion monitor. Open CopperTake Studio from the recorder menu to start the 14-day Studio trial or review the available one-time purchases. Trial activation uses the system App Store confirmation. The trial includes the recording tools and hosting one connected monitor. It ends automatically and does not renew or charge you later.

After the trial, new recordings, take editing, and hosting require the one-time Studio unlock. Studio includes one simultaneous monitoring device. The optional one-time Multi-Monitor add-on requires Studio and expands a host to up to eight simultaneous monitors. Saved takes always remain available to play and export.

To restore an existing trial or purchase, use Restore Purchases in CopperTake Studio while signed into the Apple Account used for the original transaction. The app verifies access through StoreKit. Purchases require an App Store connection; after activation, the recording workflow works offline. Contact Apple for App Store billing and refund requests.

Start a recording

Press the copper Record button and allow microphone access when requested. Press it again to stop. Your take saves automatically and stays open on the recorder. Press Play to listen, or drag the timeline to play from a particular point.

Use Resume at the end of a take to append audio. Seek earlier and choose Replace to record over a section after confirmation. New Take resets the recorder and keeps the earlier recording in Takes.

Choose and prepare a microphone

Open the input menu near the bottom of the recorder. Choose System Default or an available named input. For an interface with multiple channels, select the channel to capture. Discover Microphones refreshes the available inputs and can request microphone permission.

Open Input Setup using the sliders button beside the input menu. Recording trim, high-pass filtering, and peak limiting affect newly recorded audio. Hardware gain, sources, polar patterns, and sample-rate controls appear only when the selected input and operating system support them. A physical gain knob may need adjustment on the interface itself.

Monitor EQ affects listening and shared playback. It is separate from the input processing written to the WAV. Choose Warm Voice or another profile, or save your own EQ and input presets.

If there is no microphone signal

Check the selected input and channel, cable connections, interface gain, and any hardware mute. Check microphone permission under Privacy & Security in Settings or System Settings. On mobile devices, the available channel count and sample rate can change with the active route, including Bluetooth.

Enable Show Microphone Levels While Idle in Settings to check levels before recording. Playback, remote listening, and backgrounding can pause microphone metering. If you resume a take, use the same capture sample rate; audio captured at a changed rate is saved separately for recovery.

Connect another device

Use compatible CopperTake versions on all devices and connect them to the same local network. Keep the apps open. On the microphone or playback device choose Remote Studio, then Share This Device. On a monitor choose Find a Studio and select the host. Allow Local Network access if prompted, compare the five-character codes, and choose Codes Match on both devices.

The monitor opens the Remote Monitor deck. Start Mic Preview, recording, or take playback on the host, then choose Listen on the monitor. A host can connect up to eight monitors. The host's permissions control changes to input settings and the shared monitor mix.

Remember This Device must be enabled on both devices to save a pairing. Disconnect pauses automatic retries for the current session; Reconnect resumes them. Forget Device removes a saved pairing from that device. Mobile backgrounding suspends the connection. Some guest or public networks isolate devices from one another and prevent local discovery.

Remote Studio shares live audio, playback, measurements, and controls. Each device retains its own take library; it does not automatically copy or synchronize saved WAV files.

Find visualizations and settings

The recorder menu includes Show Signal Grid, Narration, Settings, and Keyboard Shortcuts. The signal grid shows Waveform, Radial Spectrum, Spectrogram, Histogram, and Input Level. Select a chart to focus it or open it full screen.

Use Settings to adjust defaults and the categorized Keyboard Shortcuts page to change or restore shortcuts. Timeline seeking keys work when the timeline has focus. Mobile keyboard shortcuts require a connected hardware keyboard.

Export a take

Open Takes and choose Export Original from the take's menu. Save or share the WAV with the system controls. The exported file contains the current take with its recorded input processing in mono 24-bit PCM at the captured sample rate.

Privacy

Recordings and scripts are stored in your local library. See the Privacy Policy for details about recordings, optional Remote Studio, support messages, and website analytics.